View AP2141DSG-13_8323157.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

ap2141d/ ap2151d document number: ds32242 rev. 4 - 2 1 of 18 www.diodes.com may 2013 ? diodes incorporated ap2141d/ ap2151d 0.5 single channel current-limited power switch with output discharge description the ap2141d and ap2151d are integrated high-side power switches optimized for universal serial bus (usb) and other hot-swap applications. the family of devices complies with usb 2.0 and is available with both polarities of enable input. they offer current and thermal limiting and short circuit prot ection as well as controlled rise time and under-voltage lockout functionality. a 7ms deglitch capability on the open-drain flag output prevents false over-current reporting and does not require any external components. all devices are available in sot25, so-8, msop-8ep, and u-dfn2018-6 packages. features ? single usb port power switches with output discharge ? over-current and thermal protection ? 0.8a accurate current limiting ? fast transient response ? reverse current blocking ? 90m ? on-resistance ? input voltage range: 2.7v - 5.5v ? 0.6ms typical rise time ? very low shutdown current: 1a (max) ? fault report (flg) with blanking time (7ms typ) ? esd protection: 4kv hbm, 300v mm ? active high (ap2151d) or active low (ap2141d) enable ? ambient temperature range -40c to +85c ? sot25, so-8, msop-8ep (exposed pad), and u-dfn2018-6: available in ?green? molding compound (no br, sb) ? totally lead-free & fully rohs compliant (notes 1 & 2) ? halogen and antimony free. ?green? device (note 3) ? ul recognized, file number e322375 ? iec60950-1 cb scheme certified applications ? consumer electronics ? lcd tv & monitor, game machines ? communications ? set-top-box, gps, smartphone ? computing ? laptop, desktop, servers, printers, docking station, hub pin assignments so-8 ( top view ) 1 2 3 4 8 7 6 5 nc out flg out gnd en in in en out gnd in flg 1 2 3 5 4 sot25 ( top view ) notes: 1. no purposely added lead. fully eu directiv e 2002/95/ec (rohs) & 2011/6 5/eu (rohs 2) compliant. 2. see http://www.diodes.com/quality/lead_free.html for more in formation about diodes incorporated?s definitions of halogen- a nd antimony-free, "green" and lead-free. 3. halogen- and antimony-free "green? products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total br + cl) and <1000ppm antimony compounds.
ap2141d/ ap2151d document number: ds32242 rev. 4 - 2 2 of 18 www.diodes.com may 2013 ? diodes incorporated ap2141d/ ap2151d typical applications circuit 0.1uf in gnd en out on 120uf power supply 2.7v to 5.5v 0.1uf off flg load 10k 10uf ap2151d enable active high part number channel enable pin (en) current limit (typical) recommended maximum continuous load current ap2141d 1 active low 0.8a 0.5a ap2151d 1 active high 0.8a 0.5a pin descriptions pin name pin number descriptions so-8 msop-8ep sot25 u-dfn2018-6 gnd 1 1 2 1 ground in 2, 3 2, 3 5 2 voltage input pin. (all in pins must be tied together externally) en 4 4 4 3 enable input, active low (ap2141d) or active high (ap2151d). flg 5 5 3 4 over-current and over-temperature fault report; open-drain flag is active low when triggered. out 6, 7 6, 7 1 5, 6 voltage output pin (all out pins must be tied together externally). nc 8 8 n/a n/a no internal connection; recommend tie to out pins. exposed tab - exposed tab - exposed tab exposed pad. internally connected to gnd. it should be externally connected to gnd and thermal mass for enhanced thermal impedance. it should not be used as electrical ground conduction path.
ap2141d/ ap2151d document number: ds32242 rev. 4 - 2 3 of 18 www.diodes.com may 2013 ? diodes incorporated ap2141d/ ap2151d functional block diagram thermal sense flg out gnd in en uvlo current limit current sense deglitch discharge control driver absolute maximum ratings (@t a = +25c, unless otherwise specified.) symbol parameter ratings unit esd hbm human body model esd protection 4 kv esd mm machine model esd protection 300 v v in input voltage 6.5 v v out output voltage v in +0.3 v v en , v flg enable voltage 6.5 v i load maximum continuous load curre nt internal limited a t j(max) maximum junction temperature 150 c t st storage temperature range (note 4) -65 to +150 c caution: stresses greater than the 'absolute maximum ratings' specified above, may cause permanent damage to the device. these are stress ratings only; functional operation of the device at thes e or any other conditions exceeding those indi cated in this specification is not imp lied. device reliability may be affected by exposure to absolute maximum rating conditions for extended periods of time. semiconductor devices are esd sensitive and may be damaged by exposure to esd events. suitable esd precautions should be taken when handling and transporting these devices note: 4. ul recognized rating from -30c to +70c (diodes qualified t st from -65c to +150c) recommended operating conditions (@t a = +25c, unless otherwise specified.) symbol parameter min max unit v in input voltage 2.7 5.5 v i out output current 0 500 ma t a operating ambient temperature -40 +85 ? c v ih high-level input voltage on en or en 2.0 v in v v il low-level input voltage on en or en 0 0.8 v
ap2141d/ ap2151d document number: ds32242 rev. 4 - 2 4 of 18 www.diodes.com may 2013 ? diodes incorporated ap2141d/ ap2151d electrical characteristics (@t a = +25c, v in = +5v, unless otherwise specified.) symbol parameter test conditions min typ max unit v uvlo input uvlo 1.6 1.9 2.5 v i shdn input shutdown current disabled, i out = 0 0.5 1 a i q input quiescent current enabled, i out = 0 45 70 a i leak input leakage current disabled, out grounded 0.1 1 a i rev reverse leakage current disabled, v in = 0v, v out = 5v, i rev at v in 0.1 1 a r ds(on) switch on-resistance v in = 5v, i out = 0.5a t a = +25c sot25, msop-8, msop-8ep, so-8 95 115 m ? u-dfn2018-6 90 110 -40c t a +85c 140 v in = 3.3v, i out = 0.5a t a = +25 ? c 120 140 -40c t a +85c 170 i short short-circuit current limit enabled into short circuit, c l = 22f 0.6 a i limit over-load current limit v in = 5v, v out = 4.0v, c l = 120f, -40c t a +85c 0.6 0.8 1.0 a i trig current limiting trigger threshold output current slew rate (<100a/s) , c l = 22f 1.0 a i sink en input leakage v en = 5v 1 a t d(on) output turn-on delay time c l = 1f, r load = 10 ? 0.05 ms t r output turn-on rise time c l = 1f, r load = 10 ? 0.6 1.5 ms t d(off) output turn-off delay time c l = 1f, r load = 10 ? 0.05 ms t f output turn-off fall time c l = 1f, r load = 10 ? 0.05 0.1 ms r flg flg output fet on-resistance i flg =10ma 20 40 ? t blank flg blanking time c in = 10f, c l = 22f 4 7 15 ms r dis discharge resistance (note 5) v in = 5v, disabled, i out = 1ma 100 ? t dis discharge time c l = 1f, v in = 5v, disabled to v out < 0.5v 0.6 ms t shdn thermal shutdown threshold enabled, r load = 1k ? 140 ? c t hys thermal shutdown hysteresis 25 ? c ja thermal resistance junction-to- ambient sot25 (note 6) 170 c/w so-8 (note 6) 127 msop-8ep (note 7) 67 u-dfn2018-6 (note 7) 70 notes: 5. the discharge function is active when the device is disabled (when enable is de-asserted). the discharge function off ers a resistive discharge path for the external storage capacitor. 6. device mounted on fr-4 substrate pcb, 2oz copper, with minimum recommended pad layout. 7. device mounted on 2? x 2? fr-4 substrate pcb, 2oz copper , with minimum recommended pad on top layer and thermal vias to bottom layer ground plane.
ap2141d/ ap2151d document number: ds32242 rev. 4 - 2 5 of 18 www.diodes.com may 2013 ? diodes incorporated ap2141d/ ap2151d typical performance characteristics figure 1 voltage waveforms: ap 2141d (left), ap 2151d (right) all enable plots are for ap2151d active high turn-on delay and rise time 100s/div turn-off delay and fall time 100s/div turn-on delay and rise time 500s/div turn-off delay and fall time 500s/div v en 5v/div c l = 1uf t a = +25c r l = 10 ? v out 2v/div c l = 1uf t a = +25c r l = 10 ? c l = 120f t a = +25c r l = 10 ? c l = 120f t a = +25c r l = 10 ? v en 5v/div v en 5v/div v en 5v/div v out 2v/div v out 2v/div v out 2v/div
ap2141d/ ap2151d document number: ds32242 rev. 4 - 2 6 of 18 www.diodes.com may 2013 ? diodes incorporated ap2141d/ ap2151d typical performance characteristics (cont.) short circuit current, device enabled into short 100s/div short circuit with blanking time and recovery 20ms/div 3 ? load connected to enabled device 1ms/div 2 ? load connected to enabled device 1ms/div power on power of f 2ms/div 2ms/div v en 5v/div i out 200ma/div v in = 5v t a = +25c c l = 22f i out 1a/div i out 500ma/div i out 500ma/div i out 200ma/div i out 200ma/div v in = 5v t a = +25c c l = 22f v in = 5v t a = +25c c l = 22f t a = +25c c l = 120f r l = 10 ? t a = +25c c l = 120f r l = 10 ? v in = 5v t a = +25c c l = 22f v out 5v/div vflag 5v/div v en 5v/div v flag 5v/div v flag 2v/div v flag 2v/div v en 5v/div v out 5v/div vflag 5v/div v out 5v/div
ap2141d/ ap2151d document number: ds32242 rev. 4 - 2 7 of 18 www.diodes.com may 2013 ? diodes incorporated ap2141d/ ap2151d typical performance characteristics (cont.) uvlo increasing 2ms/div uvlo decreasing 20ms/div discharge time no load resistance 100ms/div inrush current 1ms/div t a = +25c c l = 22f r l = 10 ? t a = +25c c l = 22f r l = 10 ? v in = 5v t a = +25c r l = 10 ? t a = +25c v in = 5v no load resistance c l = 470f c l = 120f c l = 22f i out 200ma/div i out 200ma/div v in 2v/div v in 2v/div v en 2v/div v out 2v/div v en 5v/div i in 200ma/div c l = 680f c l = 220f c l = 100f
ap2141d/ ap2151d document number: ds32242 rev. 4 - 2 8 of 18 www.diodes.com may 2013 ? diodes incorporated ap2141d/ ap2151d typical performance characteristics (cont.) turn-on time vs input voltage 0 100 200 300 400 500 600 700 800 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 input voltage (v) turn-on time (us) turn-off time vs input voltage 28 28 29 29 30 30 31 31 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 input voltage (v) turn-off time (us) rise time vs input voltage 0 100 200 300 400 500 600 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 input voltage (v) rise time (us) fall time vs input voltage 19 20 21 22 23 24 25 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 input voltage (v) fall time (us) supply current, output enabled vs ambient temperature 30 35 40 45 50 55 60 65 -60 -40 -20 0 20 40 60 80 100 ambient temperature (c) supply current, output enabled (ua) supply current, output disabled vs ambient temperature 0.00 0.20 0.40 0.60 0.80 1.00 1.20 1.40 1.60 -45 -25 -5 15 35 55 75 95 ambient temperature (c) supply current, output disabled (ua) c l = 1f r l = 10 ? t a = +25c v in = 5.0v c l = 1f r l = 10 ? t a = +25c c l = 1f r l = 10 ? t a = +25c c l = 1f r l = 10 ? t a = +25c v in = 5.5v v in = 3.3v v in = 2.7v v in = 2.7v v in = 3.3v v in = 5.0v v in = 5.5v
ap2141d/ ap2151d document number: ds32242 rev. 4 - 2 9 of 18 www.diodes.com may 2013 ? diodes incorporated ap2141d/ ap2151d typical performance characteristics (cont.) static drain-source on-state resistance vs ambient temperature 100 110 120 130 140 150 160 170 180 190 200 -60 -40 -20 0 20 40 60 80 100 ambient temperature (c) static drain-source on-state resistance (m ? ) short-circuit output current vs ambient temperature 630 640 650 660 670 680 690 700 710 -60 -40 -20 0 20 40 60 80 100 ambient temperature (c) short-circuit output current (ma) undervoltage lockout vs ambient temperature 1.95 1.96 1.97 1.98 1.99 2.00 2.01 2.02 2.03 2.04 2.05 -60 -40 -20 0 20 40 60 80 100 ambient temperature (c) undervoltage lockout (v) threshold trip current vs input voltage 1.10 1.11 1.12 1.13 1.14 1.15 2.8 3.3 3.8 4.3 4.8 5.3 input voltage (v) threshold trip current (a) uvlo falling uvlo rising t a = +25c c l = 22f v in = 2.7v v in = 5v v in = 2.7v v in = 3.3v v in = 5v v in = 5v v in = 5.5v v in = 3.3v
ap2141d/ ap2151d document number: ds32242 rev. 4 - 2 10 of 18 www.diodes.com may 2013 ? diodes incorporated ap2141d/ ap2151d application information the ap2141d and ap2151d are integrated high-side power switches opt imized for universal serial bus (usb) that require protectio n functions. the power switches are equipped with a driver that controls the gate voltage and incorporat es slew-rate limitation. this, along wit h the various protection features and special functions, makes these power sw itches ideal for hot-swap or hot-plug applications. protection features: under-voltage lockout (uvlo) under-voltage lockout function (uvl o) guarantees that the internal power switch is initially off during start-up. the uvlo functions only when the switch is enabled. even if the switch is enabled, the switch is not turned on until the power s upply has reached at least 1.9v. whenever the input voltage falls below approximately 1.9v, the power switch is turned off. this facilitates the design of hot-insertion systems wh ere it is not possible to turn off the power switch before input power is removed. over-current and short circuit protection an internal sensing fet is employed to c heck for over-current conditions. unlike curr ent-sense resistors, sense fets do not inc rease the series resistance of the current path. when an over current condition is detected, the device maintains a constant output current and r educes the output voltage accordingly. complete shutdown occurs only if the fault stays long enough to activate thermal limiting. the different overload c onditions and the correspondi ng response of the ap2141d/2151d are outlined below: s.no conditions explanation behavior of the ap2141d/2151d 1 short circuit condi tion at start-up output is shorted before input voltage is applied or before the part is enabled the ic senses the short circui t and immediately clamps output current to a certain safe level namely i limit. 2 short-circuit or overcurrent condition short-circuit or overload condition that occurs when the part is enabled. at the instance the overload occu rs, higher current may flow for a very short period of time before the current limit function can react. after the current limit functi on has tripped (reached the over- current trip threshold), the device switches into current limiting mode and the current is clamped at i limit . 3 gradual increase from nominal operating current to i limit load increases gradually until the current-limit threshold.(i trig ) the current rises until i trig or thermal limit. once the threshold has been reached, the device switches into its current limiting mode and is set at i limit . note that when the output has been shorted to gnd at extremely low temperature (< -20 o c), a minimum 120 f electrolytic capacitor on the output pin is recommended. a correct capacitor ty pe with capacitor voltage rating and temper ature characteristics must be properly ch osen so that capacitance value does not drop too low at the extremely low te mperature operation. a recomm ended capacitor should have temper ature characteristics of less than 10% variati on of capacitance change when operated at extr emely low temp. our recommended aluminum electrolytic capacitor type is panasonic fc series. thermal protection thermal protection prevents the ic from damage when the die temper ature exceeds safe margins. this mainly occurs when heavy-ove rload or short- circuit faults are present for extended periods of time. the ap 2141d/ap2151d implements thermal s ensing to monitor the operatin g junction temperature of the power distribution switch. once the die tem perature rises to approximately 140c, the thermal protection fea ture gets activated as follows: the internal thermal sense ci rcuitry turns the power switch off and the flg output is asserted thus preventing the power switch from damage. hysteresis in the thermal sense circ uit allows the device to cool down to a pproximately 25c before the output is turne d back on. the built- in thermal hysteresis feature avoids undesir able oscillations of the ther mal protection circuit. the switch continues to cycle in this manner until the load fault is removed, resulting in a pul sed output. the flg open-drain output is asse rted when an over-current occurs with 7-m s deglitch. reverse current protection in a normal mosfet switch, current can flow in reverse direct ion (from the output side to the input side) when the output side voltage is higher than the input side, even when the switch is turned off. a reverse-curr ent blocking feature is implemen ted in the ap21x1 series to p revent such back currents. this circuit is activated by the difference between the output voltage and t he input voltage. when the switch is disa bled, this feature blocks reverse current flow from the output back to the input.
ap2141d/ ap2151d document number: ds32242 rev. 4 - 2 11 of 18 www.diodes.com may 2013 ? diodes incorporated ap2141d/ ap2151d application information (cont.) special functions: discharge function when enable is de-asserted, the discharge func tion is active. the output capacitor is discharged through an internal nmos that has a discharge resistance of 100 ? . hence, the output voltage drops down to zero. the time ta ken for discharge is dependent on the rc time constant of the resistance and the output capacitor. flg response the flg open-drain output goes active low for any of the two conditions: over-current or over-temperature. the time from when a fault condition is encountered to when the flg output goes low is 7-ms (typ). th e flg output remains low until both over-current and over-tempera ture conditions are removed. connecting a heavy capac itive load to the output of the device can caus e a momentary over-current condition, which does not trigger the flg due to the 7-ms deglitch timeout. th e 7-ms timeout is also app licable for over-current recovery and thermal recovery. t he ap2141d/ap2151d are designed to eliminate e rroneous over-current reporti ng without the need for external components, such as an rc delay network. power supply considerations a 0.01- f to 0.1- f x7r or x5r ceramic bypass capacitor between in and gnd, close to the device, is recommended. this limits the input voltage drop during line transients. placing a high-value electrolytic capacitor on the input (10- f minimum) and output pin(s) is recommended when the output load is heavy. this pr ecaution also reduces power-supply transients that may cause ringing on the input. additionally, b ypassing the output with a 0.01- f to 0.1- f ceramic capacitor improves the immunity of the device to short-circuit transients. this capacitor also prevents the output from going negative during turn-off due to inductive parasitics. power dissipation and junction temperature the low on-resistance of the internal mosfet allows the small surface-mount packages to pass la rge current. using the maximum o perating ambient temperature (t a ) and r ds(on) , the power dissipation can be calculated by: p d = r ds(on) i 2 the junction temperatur e can be calculated by: t j = p d x r ? ja + t a where: t a = ambient temperature c r ja = thermal resistance p d = total power dissipation generic hot-plug applications in many applications it may be necessary to remove modules or pc boards while the main unit is still operating. these are consi dered hot-plug applications. such implementations require the control of current surges as s een by the main power supply and the card being in serted. the most effective way to control these surges is to limit and slowly ramp up the current and voltage being applied to the card, similar to the way in which a power supply normally turns on. due to t he controlled rise and fall ti mes of the ap2141d/ap2151d, these devices can be used to provide a softer start-up to devices being hot-plugged into a powered system. the uv lo feature of the ap2141d/ap2151d also ensures that the swit ch is off after the card has been removed, and that the sw itch is off during the next insertion. by placing the ap2141d/ap2151d between the vcc input and the rest of the circuitry, the input power reaches these devices first after insertion. the typical rise time of the switch is appr oximately 1ms, providing a slow voltage ramp at the output of the device. this imple mentation controls the system surge current and provides a hot-plugging mechanism for any device.
ap2141d/ ap2151d document number: ds32242 rev. 4 - 2 12 of 18 www.diodes.com may 2013 ? diodes incorporated ap2141d/ ap2151d ordering information part number package code packaging 7?/13? tape and reel quantity part number suffix ap21x1dsg-13 s so-8 2500/tape & reel -13 ap21x1dmpg-13 mp msop-8ep 2500/tape & reel -13 ap21x1dwg-7 w sot25 3000/tape & reel -7 ap21x1dfmg-7 fm u-dfn2018-6 3000/tape & reel -7 marking information (1) so-8 ap21x x d ( top view ) yy ww x x part number logo ww : week : 01~52; 52 yy : year : 08, 09,10~ g : green x : internal code 8765 1 2 34 4 : active low 5 : active high 1 : 1 channel represents 52 and 53 week
ap2141d/ ap2151d document number: ds32242 rev. 4 - 2 13 of 18 www.diodes.com may 2013 ? diodes incorporated ap2141d/ ap2151d marking information (cont.) (2) msop-8ep (3) sot25 1 2 3 5 7 4 xx y w x xx : identification code w : week : a~z : 1~26 week; x : a~z : green ( top view ) y : year 0~9 a~z : 27~52 week; z represents 52 and 53 week (4) u-dfn2018-6 device package type identification code ap2141dw sot25 ja ap2151dw sot25 jb device package type identification code ap2141dfm u-dfn2018-6 ja ap2151dfm u-dfn2018-6 jb
ap2141d/ ap2151d document number: ds32242 rev. 4 - 2 14 of 18 www.diodes.com may 2013 ? diodes incorporated ap2141d/ ap2151d package outline dimensions (all dimensions in mm.) please see ap02002 at http://ww w.diodes.com/datasheets/ap02002. pdf for latest version. (1) package type: so-8 (2) package type: msop-8ep so-8 dim min max a - 1.75 a1 0.10 0.20 a2 1.30 1.50 a3 0.15 0.25 b 0.3 0.5 d 4.85 4.95 e 5.90 6.10 e1 3.85 3.95 e 1.27 typ h - 0.35 l 0.62 0.82 ?? 0 ? 8 ? all dimensions in mm msop-8ep dim min max typ a - 1.10 - a1 0.05 0.15 0.10 a2 0.75 0.95 0.86 a3 0.29 0.49 0.39 b 0.22 0.38 0.30 c 0.08 0.23 0.15 d 2.90 3.10 3.00 d1 1.60 2.00 1.80 e 4.70 5.10 4.90 e1 2.90 3.10 3.00 e2 1.30 1.70 1.50 e3 2.85 3.05 2.95 e - - 0.65 l 0.40 0.80 0.60 a 0 8 4 x - - 0.750 y - - 0.750 all dimensions in mm gauge plane seating plane detail ?a? detail ?a? e e1 h l d e b a2 a1 a 45 7 ~ 9 a3 0.254 1 d a a1 a2 e e y x seating plane gauge plane l d 8xb see detail c detail c c a e1 e3 a3 e2 4 x 1 0 4 x 1 0 0.25 d1
ap2141d/ ap2151d document number: ds32242 rev. 4 - 2 15 of 18 www.diodes.com may 2013 ? diodes incorporated ap2141d/ ap2151d package outline dimensions (cont.) (all dimensions in mm.) (3) package type: sot25 (4) package type: u-dfn2018-6 sot25 dim min max typ a 0.35 0.50 0.38 b 1.50 1.70 1.60 c 2.70 3.00 2.80 d ?? ?? 0.95 h 2.90 3.10 3.00 j 0.013 0.10 0.05 k 1.00 1.30 1.10 l 0.35 0.55 0.40 m 0.10 0.20 0.15 n 0.70 0.80 0.75 ?? 0 8 ?? all dimensions in mm u-dfn2018-6 dim min max typ a 0.545 0.605 0.575 a1 0 0.05 0.02 a3 ?? ?? 0.13 b 0.15 0.25 0.20 d 1.750 1.875 1.80 d2 1.30 1.50 1.40 e ?? ?? 0.50 e 1.95 2.075 2.00 e2 0.90 1.10 1.00 l 0.20 0.30 0.25 z ? ? 0.30 all dimensions in mm a m j l d b c h k n seating plane e e2 l a d d2 a3 a1 e b pin#1 id z
ap2141d/ ap2151d document number: ds32242 rev. 4 - 2 16 of 18 www.diodes.com may 2013 ? diodes incorporated ap2141d/ ap2151d suggested pad layout please see ap02001 at http://www. diodes.com/datasheets/ap02001.pdf for the latest version. (1) package type: so-8 (2) package type: msop-8ep (3) package type: sot25 dimensions value (in mm) x 0.60 y 1.55 c1 5.4 c2 1.27 dimensions value (in mm) c 0.650 g 0.450 x 0.450 x1 2.000 y 1.350 y1 1.700 y2 5.300 dimensions value (in mm) z 3.20 g 1.60 x 0.55 y 0.80 c1 2.40 c2 0.95 g x c y y2 y1 x1 x z y c1 c2 c2 g x c1 c2 y
ap2141d/ ap2151d document number: ds32242 rev. 4 - 2 17 of 18 www.diodes.com may 2013 ? diodes incorporated ap2141d/ ap2151d suggested pad layout (cont.) please see ap02001 at http://www. diodes.com/datasheets/ap02001.pdf for the latest version. (4) package type: u-dfn2018-6 taping orientation (note 8) for u-dfn2018-6 note: 8. the taping orientation of the other package type c an be found on our website at h ttp://www.diodes.c om/datasheets/ap 02007.pdf dimensions value (in mm) c 0.50 g 0.20 x 0.25 x1 1.60 y 0.35 y1 1.20 y xc x1 g y1
ap2141d/ ap2151d document number: ds32242 rev. 4 - 2 18 of 18 www.diodes.com may 2013 ? diodes incorporated ap2141d/ ap2151d important notice diodes incorporated makes no warranty of any kind, express or implied, with regards to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose (and their equivalents under the laws of any jurisdiction). diodes incorporated and its subsidiaries rese rve the right to make modi fications, enhancements, improv ements, corrections or ot her changes without further notice to this document and any product described herein. diodes incorporated does not assume any liability ari sing out of the application or use of this document or any product described herein; neither does diodes incorporated convey any license under its patent or trademark rights, nor the rights of others. any customer or user of this document or products described herein in such applica tions shall assume all risks of such use and will agree to hold diodes incorporated and all the companies whose pr oducts are represented on diodes incorporated website, harmless against all damages. diodes incorporated does not warrant or a ccept any liability whatsoever in respec t of any products pu rchased through unauthoriz ed sales channel. should customers purchase or use diodes inco rporated products for any unintended or una uthorized application, customers shall i ndemnify and hold diodes incorporated and its representativ es harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. products described herein may be covered by one or more united states, international or fore ign patents pending. product names and markings noted herein may also be covered by one or more un ited states, international or foreign trademarks. this document is written in english but may be translated into multiple languages for reference. only the english version of t his document is the final and determinative format released by diodes incorporated. life support diodes incorporated products are specifically not authorized for use as critical com ponents in life support devices or systems without the express written approval of the chief executive offi cer of diodes incorporated. as used herein: a. life support devices or syst ems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when proper ly used in accordance with in structions for use provided in the labeling can be reasonably expected to result in significant injury to the user. b. a critical component is any component in a life support devic e or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. customers represent that they have all necessary expertise in the safety and regulatory ramifi cations of their life support dev ices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-rel ated requirements concerning the ir products and any use of diodes incorporated products in su ch safety-critical, life support devices or systems, notwithstanding any devices- or s ystems-related information or support that may be provided by diodes incorporated. further, customer s must fully indemnify diodes incorporate d and its representatives against any damages arisi ng out of the use of diodes incorporated pr oducts in such safety-critical, life suppor t devices or systems. copyright ? 2013, diodes incorporated www.diodes.com

▲Up To Search▲

Price & Availability of AP2141DSG-13

	To Download AP2141DSG-13 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .